Counterbored hole¶
cuts.counterbored_hole
A clearance hole for a 5 mm screw, counterbored for its head and a 10 mm plug over it, e.g. in a batten screwed to a door.
Parameters¶
| Parameter | Default |
|---|---|
stock |
20 mm board, oak |
Change them in a design file (see Change an example):
Drawings¶
The plans in one PDF: plans.pdf.
Board
Cut list¶
board 300 x 60 x 20 mm oak
- 2 x through hole ø5.5, counterbored ø10, 8 deep, in top_face, 40 from left_end and right_end; centered
Code¶
From woodwright/examples/cuts.py, which imports the names it uses (see From an example to your own design):
def counterbored_hole(stock: Stock = OAK) -> Assembly:
"""A clearance hole for a 5 mm screw, counterbored for its head and a
10 mm plug over it, e.g. in a batten screwed to a door."""
asm, board = _board("counterbored_hole", stock, length=300, width=60)
for end in (board.left_end, board.right_end):
board.cut(Hole(board.top_face, 5.5, at={end: 40}, counterbore=10, counterbore_depth=8))
return asm
Exported with woodwright 0.9.0 on 2026-10-25.