Box joint corner¶

from woodwright.examples import joints

design = joints.box_joint_corner(front_length=375)

front  300 x 100 x 12 mm  oak
       - box joint, 5 fingers 11.1 mm wide, 12 long
side   200 x 100 x 12 mm  oak
       - box joint, 4 fingers 11.1 mm wide, 12 long

def box_joint_corner(
    front_length: float = 300,
    side_length: float = 200,
    height: float = 100,
    stock: Stock = SIDE_OAK,
) -> Assembly:
    """The corner of a box with a box (finger) joint: square fingers on both ends.

    The fingers come out close to the stock's thickness, nine of them, the
    front's at the top and the bottom edges. The lengths are outside
    dimensions: the boards reach through each other.
    """
    asm = Assembly("box_joint_corner", root_location=BOX_FRONT)
    t = stock.thickness
    front = asm.add(Board("front", stock, length=front_length - t, width=height))
    side = asm.add(Board("side", stock, length=side_length - t, width=height))
    asm.join(BoxJoint(front.left_end, side.right_end))
    return asm