Interlocking rabbet corner¶

from woodwright.examples import joints

design = joints.interlocking_rabbet_corner(side_height=500)

side  400 x 200 x 20 mm  oak
      - end rabbet 10 mm, 10 deep, in bottom_face at right_end
top   490 x 200 x 20 mm  oak
      - lap 10 mm thick, 10 long, on left_end

def interlocking_rabbet_corner(
    side_height: float = 400, top_length: float = 500, depth: float = 200, stock: Stock = OAK
) -> Assembly:
    """A carcase corner with two interlocking rabbets: a lip of the top in a rabbet of the side.

    The side's outer lip covers the top's end grain. The top's length is
    between the sides, the side's height is overall.
    """
    asm = Assembly("interlocking_rabbet_corner", root_location=CASE_SIDE)
    side = asm.add(Board("side", stock, length=side_height, width=depth))
    top = asm.add(Board("top", stock, length=top_length - stock.thickness, width=depth))
    asm.join(
        RabbetJoint(
            rabbet=side.bottom_face,
            end=top.left_end,
            at=side.right_end,
            lap=stock.thickness / 2,
        )
    )
    return asm