Leg and aprons¶

from woodwright.examples import joints

design = joints.leg_and_aprons(tenon_length=31.25)

leg          700 x 45 x 45 mm  oak
             - mortise 80 x 8 mm, 27 deep, in back_edge
             - mortise 80 x 8 mm, 27 deep, in top_face
front_apron  425 x 100 x 20 mm  oak
             - tenon 80 x 8 mm, 25 long, on left_end
side_apron   325 x 100 x 20 mm  oak
             - tenon 80 x 8 mm, 25 long, on left_end

def leg_and_aprons(tenon_length: float = 25, setback: float = 3) -> Assembly:
    """A table leg with two aprons, their short tenons not meeting inside the leg.

    The tenons must stay short: with the default length (two thirds of the
    leg) they would clash.
    """
    return _leg_and_aprons("leg_and_aprons", tenon_length, mitred=False, setback=setback)