Table frame¶

from woodwright.examples import projects

design = projects.table_frame(width=1000)

leg               700 x 45 x 45 mm  oak, 4 pieces: leg_front_left, leg_front_right, leg_back_right, leg_back_left
                  - mortise 80 x 8 mm, 38 deep, in back_edge
                  - mortise 80 x 8 mm, 38 deep, in top_face
apron_front_back  782 x 100 x 20 mm  oak, 2 pieces: apron_front, apron_back
                  - tenon 80 x 8 mm, 36 long, end mitred 45 deg towards bottom_face, on left_end
                  - tenon 80 x 8 mm, 36 long, end mitred 45 deg towards bottom_face, on right_end
apron_right_left  482 x 100 x 20 mm  oak, 2 pieces: apron_right, apron_left
                  - tenon 80 x 8 mm, 36 long, end mitred 45 deg towards bottom_face, on left_end
                  - tenon 80 x 8 mm, 36 long, end mitred 45 deg towards bottom_face, on right_end

def table_frame(
    width: float = 800,
    depth: float = 500,
    height: float = 700,
    apron_width: float = 100,
    setback: float = 3,
    leg_stock: Stock = LEG_STOCK,
    stock: Stock = OAK,
) -> Assembly:
    """Four legs and four aprons tenoned into them, without a top; outside sizes.

    At each leg two tenons meet from adjacent sides, so they are mitred and
    meet on the leg's diagonal.
    """
    # The front left leg stands at the origin, its outside sides (bottom face,
    # front edge) to the front and to the left.
    asm = Assembly("table_frame", root_location=STANDING)
    _table_frame(asm, width, depth, height, apron_width, setback, leg_stock, stock)
    return asm